<legend id="h65ta"></legend>
    1. <optgroup id="h65ta"><em id="h65ta"><pre id="h65ta"></pre></em></optgroup>
      <ol id="h65ta"><output id="h65ta"></output></ol>
        <span id="h65ta"><sup id="h65ta"></sup></span>
      1. <acronym id="h65ta"></acronym>

        全自動造型機廠家

        —專注水平造型機研發、生產!

        全國24小時咨詢熱線: 13926238353

        常見問題

        全自動造型機模具的使用要求

              全自動造型機模具為雙面模具,一般以材質較輕的鋁模為主,從傳統的半自動蹦蹦機過渡轉型為全自動造型機,我們建議量大的產品鑄件重新定做鋁模具,以便正常大批量的生產,提高鑄件成品率;較少需求量的鑄件可以根據原有的模具最大程度上再次利用,例如使用夾具固定模具,詳細建議還需根據實際情況而定;

        The full-automatic molding machine mold is a double-sided mold. Generally, the aluminum mold with lighter material is the main mold, which is transformed from the traditional semi-automatic molding machine to the full-automatic molding machine. We suggest that a large number of product castings be re customized with aluminum mold, so as to normal mass production and improve the casting yield. The castings with less demand can be reused according to the original mold to the maximum extent, for example If the fixture is used to fix the mould, the detailed suggestions shall be determined according to the actual situation;

        造型機模具

        (客戶物流寄予我方做造型測試使用的模具,模具按我方提供的標配尺寸規格定做)

        (the molds sent by customer logistics to us for shape test are customized according to the standard size and specification provided by us)

        造型機模具

        (模具模型排放過于緊密,對于砂的質量要求非常高,正常建議邊距留3-5公分間隙)

        (the die model is too tightly drained, and the quality requirements for sand are very high. Normally, it is recommended to leave a 3-5cm gap between the edges.)

             關于模具的定做客戶可直接聯系我方,我方將為您提供各種型號全自動造型機模具的尺寸規格圖紙,如模具的厚度,拔模度等;如鑄件較為復雜我們可以后期在模具上加工安置排氣孔引流,完成較為復雜鑄件產品生產造型;

        Customers can contact us directly about the customized mold, and we will provide you with dimension and specification drawings of various types of full-automatic molding machine mold, such as mold thickness, draft degree, etc.; if the casting is more complex, we can process and place vent drainage on the mold later to complete the production modeling of more complex casting products;



        詳情請咨詢中鑄機械李工:15917377252

        回到頂部

        鑄造造型機廠家 長按二維碼添加微信好友

        廣東中鑄機械有限公司
        電話:13926238353
        聯系人:李經理
        郵箱:470199755@qq.com
        地址:廣州市花都區迎賓大道123號
        備案號:粵ICP備16050083號
        中鑄機械網址:http://www.jasafloorhardener.com

        日本一高清二区视频久二区首页