<progress id="qg1ed"></progress><optgroup id="qg1ed"></optgroup>

<optgroup id="qg1ed"></optgroup>

      1. <legend id="qg1ed"><li id="qg1ed"><dfn id="qg1ed"></dfn></li></legend> <span id="qg1ed"><sup id="qg1ed"></sup></span>

          <optgroup id="qg1ed"></optgroup>
          <acronym id="qg1ed"><blockquote id="qg1ed"></blockquote></acronym>

        1. 全自動造型機廠家

          —專注水平造型機研發、生產!

          全國24小時咨詢熱線: 13926238353

          案例展示

          江西宜黃Z5565全自動造型機調試完畢

          13606.jpg


          江西宜黃Z5565全自動造型機配地軌小車線于2020年4月份安裝調試完畢正式投產,上圖為安裝調試人員拍攝的造型機使用現場圖片

          Jiangxi Yihuang z5565 automatic casting molding machine with ground rail trolley line was formally put into operation after installation and commissioning in April 2020. The above picture is the field picture of molding machine taken by the installation and commissioning personnel


          13608_01.jpg


          中鑄機械調試安裝技術人員朗師傅與客戶的合影,感謝客戶對我們的肯定以及對設備使用情況的滿意,Z5565(550mmX650mm)型號全自動造型機每小時實際生產可完成96模的砂型造型生產(不含下芯),節省人工成本,提高生產效率!

          Mr. Lang, a zoomzu commissioning and installation technician, took a group photo with the customer. Thank the customer for their affirmation and satisfaction with the use of the equipment. The Z5565 (550mmX650mm) full-automatic molding machine can complete 96 mold sand molding production (excluding the lower core) every hour, save labor cost and improve the production efficiency!


          微信圖片_20200423165832.jpg


          全自動造型機使用的雙面鋁模

          Double sided aluminum mold for automatic casting molding machine


          13605_01.jpg


          通過造型機射砂壓實后的砂型面效果圖片,模具高度較低,砂型設置高度為上箱100mm下箱80mm。

          According to the effect picture of sand mold surface after sand blasting and compaction by molding machine, the mold height is relatively low, and the setting height of sand mold is 100mm for upper box and 80mm for lower box.


          水平全自動造型機


          自動造型機白天作業打型,晚上工人開爐澆注,整體車間場地可分兩批對換擺放砂型,砂子澆注后經過一天的時間冷卻才被重新回收利用,保證了砂子在正常溫度下重新進過機器造型澆注,使得鑄件的產品質量有更好的保障!


          The whole workshop can be divided into two batches to place sand mold. After pouring, the sand can be recycled after one day's cooling, which ensures that the sand can be re casted by the machine at normal temperature, so that the quality of casting products can be better guaranteed!


          回到頂部

          鑄造造型機廠家 長按二維碼添加微信好友

          廣東中鑄機械有限公司
          電話:13926238353
          聯系人:李經理
          郵箱:470199755@qq.com
          地址:廣州市花都區迎賓大道123號
          備案號:粵ICP備16050083號
          中鑄機械網址:http://www.jasafloorhardener.com

          中文有码无码人妻在线